top of page

Doggies911 Top Dogグループ

公開·42名のメンバー
Rick Gopala
Rick Gopala

How to Use MirrorOp Receiver on Windows PC



How to Use MirrorOp Receiver on Windows PC




MirrorOp Receiver is a software application that allows you to mirror the screen of your PC, Mac, or mobile device on a large screen in your classroom, meeting room, or other collaborative environment. It works with MirrorOp senders, which are devices that can transmit video and audio signals to the receiver. In this article, we will show you how to use MirrorOp Receiver on Windows PC.




mirrorop receiver windows crack key



Step 1: Download and install MirrorOp Receiver




You can download MirrorOp Receiver for free from the official website of Barco[^1^], the company that develops and distributes MirrorOp products. Alternatively, you can use this link[^2^] to download the latest version of MirrorOp Receiver for Windows. The file size is about 15 MB and the installation process is straightforward. Just follow the instructions on the screen and accept the license agreement.


Step 2: Connect your Windows PC to a large screen




You can connect your Windows PC to a large screen using a HDMI cable, a VGA cable, or a wireless adapter. Make sure that both devices are turned on and that the input source of the large screen is set to the correct one. You should see your Windows desktop on the large screen.


Step 3: Launch MirrorOp Receiver and scan for senders




Once you have installed MirrorOp Receiver, you can launch it from the Start menu or the desktop shortcut. You will see a window with a QR code and a list of available senders. A sender is any device that can transmit video and audio signals to the receiver using MirrorOp technology. For example, you can use your smartphone, tablet, laptop, or Chromebook as a sender. To scan for senders, click on the refresh button at the top right corner of the window. You should see the names and IP addresses of the senders that are connected to the same network as your receiver.


Step 4: Connect to a sender and start mirroring




To connect to a sender, you can either scan the QR code with your sender device or enter the IP address manually. Once you are connected, you will see a preview of the sender's screen on your receiver window. You can also control some settings such as resolution, quality, audio, and full screen mode. To start mirroring, click on the play button at the bottom right corner of the window. You should see the sender's screen on both your receiver window and the large screen.


Step 5: Disconnect from a sender and exit MirrorOp Receiver




To disconnect from a sender, click on the stop button at the bottom right corner of the window. You will see a message asking you to confirm your action. Click on OK to disconnect. To exit MirrorOp Receiver, click on the X button at the top right corner of the window. You will see another message asking you to confirm your action. Click on OK to exit.


Conclusion




MirrorOp Receiver is a useful software application that allows you to mirror the screen of your PC, Mac, or mobile device on a large screen in your classroom, meeting room, or other collaborative environment. It works with MirrorOp senders, which are devices that can transmit video and audio signals to the receiver. In this article, we showed you how to use MirrorOp Receiver on Windows PC. We hope you found it helpful and informative. e0e6b7cb5c


グループについて

グループへようこそ!他のメンバーと交流したり、最新情報を入手したり、動画をシェアすることができます。

メンバー

bottom of page